🎉 Up to 70% Off Selected ItemsShop Sale
Celestion T5622 BN10 200X Bass Speaker 10 Inch 200W 8OHM
HomeStore

Celestion T5622 BN10 200X Bass Speaker 10 Inch 200W 8OHM

Celestion T5622 BN10 200X Bass Speaker 10 Inch 200W 8OHM

$259.00
Celestion T5622 BN10 200X Bass Speaker 10 Inch 200W 8OHM—
$259.00

The Story

:
Not every player wants a super-clean, high-fidelity bass sound. Characterised by an extended low end and greater linear excursion, Green Label speakers push out every note with a rich, warm tone and a powerful low-end thump.

Available with Ferrite or Neodymium magnets, Green Label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.

Specifications:

Nominal diameter254mm/10in
Power rating200Wrms
Nominal impedance8Ω
Sensitivity96dB
Magnet typeNeodymium
Voice coil diameter50.8mm/2in
Coil materialCopper
Cone materialKevlar loaded paper
Former materialPolyimide
Surround materialCloth-sealed
Frequency range45-3500Hz
Xmax4mm/0.15in
Gap depth8mm/0.31in
Voice coil winding width16mm/0.62in
Small Signal Parameters
D0.21m/8.27in
Fs65Hz
Mair3.64g/0.128oz
Mmd28.9g/1.02oz
Qms3.57
Qes0.34
Qts0.31
Re5.8Ω
Vas31.15lt/1.09ft3
BI15.03Tm
Cms0.18mm/N
Rms3.73kg/s
Le (at 1kHz)0.68mH
Mounting Information
Cut-out diameter229mm/9in
Diameter256mm/10.1in
Mounting slot dimensions6 x 8mm/0.24 x 0.31in
Mounting slot PCD245mm/9.6in
Number of mounting slots4
Overall depth112mm/4.4in
Unit weight1.5kg/3.3lb

Description

:
Not every player wants a super-clean, high-fidelity bass sound. Characterised by an extended low end and greater linear excursion, Green Label speakers push out every note with a rich, warm tone and a powerful low-end thump.

Available with Ferrite or Neodymium magnets, Green Label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.

Specifications:

Nominal diameter254mm/10in
Power rating200Wrms
Nominal impedance8Ω
Sensitivity96dB
Magnet typeNeodymium
Voice coil diameter50.8mm/2in
Coil materialCopper
Cone materialKevlar loaded paper
Former materialPolyimide
Surround materialCloth-sealed
Frequency range45-3500Hz
Xmax4mm/0.15in
Gap depth8mm/0.31in
Voice coil winding width16mm/0.62in
Small Signal Parameters
D0.21m/8.27in
Fs65Hz
Mair3.64g/0.128oz
Mmd28.9g/1.02oz
Qms3.57
Qes0.34
Qts0.31
Re5.8Ω
Vas31.15lt/1.09ft3
BI15.03Tm
Cms0.18mm/N
Rms3.73kg/s
Le (at 1kHz)0.68mH
Mounting Information
Cut-out diameter229mm/9in
Diameter256mm/10.1in
Mounting slot dimensions6 x 8mm/0.24 x 0.31in
Mounting slot PCD245mm/9.6in
Number of mounting slots4
Overall depth112mm/4.4in
Unit weight1.5kg/3.3lb